Home » Smart Security » Remote Control 2110

Remote Control 2110


SKU: 4003482397800 Category:

Remote control Control 2110 – Handy and easy to use

The handy Control 2110 remote ensures you have the most important functions of your BURGprotectTM smart home system to hand at all times. By pressing a button, you can arm or disarm the alarm system. The remote can be programmed to activate or deactivate specific sensors around the home – for example, in the garage or the ground floor windows. Programming of the remote functions can be done via the BURGprotectTM app.

Registered within seconds to the Smart Home base

Before the Control 2110 is ready for use it must be registered with the Smart Home system. This can be done in seconds with the BURGprotectTM app. Simply scan the QR code (clearly printed on the back of the Control 2110) and the device is registered with the Base 2200 and ready for use. It’s that easy! The light compact remote control can be attached to key chains to ensure it is always to hand.

Control 2110 offers additional SOS function

The Control 2110 offers a SOS panic function. This is especially suitable for single and / or elderly people. Pressing the corresponding button on the remote control immediately sends a message to all stored contacts informing them you require assistance. In the event the supplied battery is low, a notification will be sent via the BURGprotectTM system ensuring the remote is always ready to use.

Remote control Control 2110 at a glance

  • Alarm on / off
  • Home scenario on / off
  • SOS panic function
  • Range up to 50 m
  • Low battery message
  • Compatible with the entire BURGprotect series
  • Battery included


Operating voltage DC 6 V
Max. power input 1 x R2032
Max. operating current < 7,5 mA
Max. standby ~0,0 mA
Max. range outside 200 m*
Max. range inside 50 m*
Transmission frequency 433,92 MHz
Working temperature -20 °C bis 50 °C
Weight 16,0 g (inkl. battery)
Dimensions 58 x 33 x 11 mm (H x W x D)

*Varies greatly depending on environmental factors