Home » Smart Security » Noise 2160

Noise 2160


SKU: 4003482398067 Category:

Indoor siren Noise 2160 with 18 months battery life

Noise 2160 Indoor Sirene BURGprotect Piktogramme

The Noise 2160 indoor siren from the BURGprotectTM adds a further component to your alarm system. Because the indoor siren informs you immediately if a sensor detects an attempted break-in or if there is a threat of damage from fire or water. In the event an alarm of up to 80 decibels is triggered. The red LED also flashes. You therefore also get a visual warning signal.

Variable mounting thanks to its wide reach

The Noise 2160 alarm siren combines several advantages in one device. You are free to choose where to install it. Because the range indoors is up to 50 metres. There is also no need to connect the siren to the power supply, as the batteries supplied provide a standby time of up to 18 months. And If a battery does need changing, this is indicated for you in the BURGprotectTM App. You can of course also choose to operate the Noise 2160 using the supplied power cable. The device is also fitted with tamper protection. Triggered by the tamper switch, the alarm sounds should anyone unauthorised tamper with the siren alarm.

Simply scan the QR code and the Noise 2160 is automatically registered in the alarm control centre.

Installing the Noise 2160 in your BURGprotectTM Smart Home System is very easy. Because using the free app you can scan the QR code printed on the siren. This automatically registers the device in the Base alarm control centre list, which is necessary to use the siren, and thus renders it ready to use. You can also easily adjust the settings for the alarm volume and the visual warning signal via the app.

Tip before installation (all corresponding material is included): Test whether there is a radio connection between the Noise 2160 and the Base alarm centre at the desired installation location. This depends on the ambient conditions. For example, metal objects, concrete ceilings and cables reduce the wireless range.

The Noise 2160 indoor siren at a glance

  • Audible and visual alarm
  • Alarm signal up to 80 dB; LED status display (configurable)
  • Radio control range up to 50 m (indoor use)
  • Tamper protection
  • Up to 18 months standby battery operation
  • Scope of supply: 3x AA (LR6 Alkaline) battery, power adapter, installation material, instructions


Power Supply / Backup Battery USB 5V 1A / 3x AA LR6 dry cells
Transmission Frequency 433.05 – 434.79 MHz
Max. Transmission Power <10 mW
Transmission Distance up to 50 m* indoor
Standby Current 20 μA
Working Current <350 mA
Siren Volume 80 dB @ 30 cm
Working Temperature/ Humidity -10 C ~ 40 C° / 90% rh (non-condensing)
 Tamper protection Supported
Prompt Tone and Voice Adjustment / Indicator of System Status Yes
Battery Standby Time 18 months
Housing Material PC+ABS
Weight 115,0 g (without Batteries); 184,0 g (with Batteries)
Dimensions (L×W×H) / Mounting Screw Pitch 108 × 86 × 28 mm / 70 mm

*Varies strongly depending on environmental factors